User Guide
40
Macro Page Notation
Before you begin to program a Macro, study the notation used in
the MACRO mode. Each type of action has its own notation.
Reference
6.
Programming Macros
DVD
- When only a device
name is listed, the macro
step will be a Device
Action (the action that
occurs when the Device
is selected, which is typi-
cally the receiver/pre-
amp’s source selection or
input command).
GO: DVD - Main
- A Go command indica-
tes a panel jump. In this
case,
“
TV
”
means a
jump to the TV device
and Main is the name
for the particular panel
(sometimes panels just
have numbers, not
names).
AMP - ON
- When a
device name and a but-
ton name are listed, that
particular button’s IR
command will be issued.
DVD-
n
- A device name and the
Stop symbol means that
this particular button’s IR
command will be issued.
The symbol list can be
found on page 54.
Delay
- A delay counts as one
of the 250 macro steps.
Delays can be adjusted
in 0.1 second intervals
to be any value between
0.1 second and 99.9
seconds.
Adjusting Delays
- When a delay is
“
Selected,
”
you can
adjust the delay with
the + and - buttons.
Beep
- A beep counts
as one of the 250 macro
steps. Useful to notify
when the macro execu-
tion is finished
