Manitou MT 625 H 75K COMFORT ST5 S1, Operator'S Manual

Page: 25 / 136

1 - 21
F6
1
2
3
F7
1
2
F8
1
F9
1
F10
PUTTING DOWN A HIGH LOAD ON TYRES
-Approach the load in the transport position in front of the stack (fig. F6).
-Apply the parking brake and place the forward/reverse selector in neutral.
-Raise and extend the boom (1) (2) until the load is above the stack, while monitoring
the longitudinal stability indicator (
e
INSTRUCTIONS FOR HANDLING A LOAD:
C - LONGITUDINAL STABILITY INDICATOR). If necessary, move the lift truck (3)
forward (fig. F7), driving very slowly and carefully.
-Place the load in a horizontal position and put it down on the pile by lowering and
retracting the boom (1) (2) in order to position the load correctly (fig. F8).
-If possible, release the forks by alternately retracting and raising the boom (1)
(fig. F9). Then put the forks into transport position.
-If this is not possible, reverse the lift truck (1), manoeuvring very slowly and carefully
to release the forks (fig. F10). Then put them into transport position.
647732
(31/10/2019)
MT
625
H
75K
ST5
S1
/ MT
625
H
75K
COMFORT
ST5
S1