Manitou MT 625 H 75K COMFORT ST5 S1, Operator'S Manual

Page: 104 / 136

3 - 18
1
1
2
3
4
6
8
9
5
7
10
5
10
10
10
LUBRICATE General lubrication
To be carried out weekly, if the lift truck has been operated for less than 50 hours during the week.
t
IMPORTANT
t
In the event of prolonged use in an extremely dusty or oxidising atmosphere, reduce this interval to 10 hours of service or every day.
Clean, then lubricate the following points with grease (
e
LUBRICANTS AND FUEL) and remove the surplus.
BOOM
1 - Lubricators of the boom pin (2 lubricators).
2 - Lubricator of the carriage pin (1 lubricator).
3 - Lubricator of the tilting cylinder foot pin (1 lubricator).
4 - Lubricator of the tilting cylinder head pin (1 lubricator).
5 - Lubricator of the lifting cylinder foot pin (1 lubricator).
6 - Lubricator of the lifting cylinder head pin (1 lubricator).
7 - Lubricator of the compensating cylinder foot pin (1 lubricator).
8 - Lubricator of the compensating cylinder head pin (1 lubricator).
FRONT AND REAR WHEEL REDUCTION GEAR PIVOTS
9 - Lubricators of the wheel reduction gear pivot pins (8 lubricators).
REAR AXLE OSCILLATION
10 - Rear axle oscillation lubricators (2 lubricators).
OPTION
647732
(31/10/2019)
MT
625
H
75K
ST5
S1
/ MT
625
H
75K
COMFORT
ST5
S1