Manitou MT 625 H 75K COMFORT ST5 S1, Operator'S Manual

Page: 129 / 136

INTRODUCTION
-Your lift truck must be used with interchangeable equipment. These items are called: ATTACHMENTS.
-A wide range of attachments is available, guaranteed by MANITOU and designed to fit your lift truck perfectly.
d
IMPORTANT
d
Only attachments approved by MANITOU can be used with their lift trucks (
e
TECHNICAL SPECIFICATIONS OF ATTACHMENTS).
The manufacturer cannot be held responsible for any modifications or adaptations to attachments without its knowledge.
-The attachments are delivered with a load chart concerning your lift truck. The operator's manual and the load chart
should be kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions
contained on this notice.
d
IMPORTANT
d
Maximum loads are defined by the capacity of a lift truck taking account of the attachment’s mass and centre of gravity.
Should the attachment have a lower capacity than the lift truck, never exceed this limit.
-Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional
solutions exist, consult your dealer.
d
IMPORTANT
d
Depending on their size, certain attachments may, when the boom is lowered and retracted, come into contact with the front tyres and cause damage to them if excavation
is activated in the direction of the discharge.
TO PREVENT THIS RISK, EXTEND THE TELESCOPE TO A SUFFICIENT EXTENT FOR THE PARTICULAR LIFT TRUCK AND ATTACHMENT SO THAT THIS CONTACT IS NOT POSSIBLE.
SUSPENDED LOAD
q
IMPORTANT
q
Suspended loads MUST be handled with a lift truck designed for that purpose (
e
1 - OPERATING AND SAFETY INSTRUCTIONS: LOAD HANDLING INSTRUCTIONS:
H - PICKING UP AND PUTTING DOWN A SUSPENDED LOAD).
4 - 3
4 - OPTIONAL ADAPTABLE ATTACHMENTS FOR THE RANGE
INTRODUCTION 4-3
PICKING UP THE ATTACHMENTS 4-4
TECHNICAL SPECIFICATIONS OF ATTACHMENTS 4-6
ATTACHMENT GUARDS 4-10
647732
(31/10/2019)
MT
625
H
75K
ST5
S1
/ MT
625
H
75K
COMFORT
ST5
S1