Mallinckrodt INOMAX DSir Plus, Operation Manual

Page: 31 / 206

Part No. 20717 Rev-01
2014-07
1-19
5. When the INOmeter is turned ON (cylinder
open) the display will show a "+" (positive) sign
(see Figure 1-12) and alternate between:
a. The event time XX.X in hours since turned
ON (eight seconds).
b. The total cumulative time XXX in hours of
all the ON events (four seconds).
c. The display alternates between a and b for
the indicated times in parenthesis above.
Figure 1-12 Cylinder Open
Figure 1-13 Cylinder Closed
3. Press lock downward to remove from the
INOmeter (see Figure 1-10).
4. The cylinder must be closed to reinsert the lock.
Align directly across from the iButton
and press upward into socket to attach lock
(see Figure 1-11).
Figure 1-11
iButton
Close Cylinder valve
to Replace Lock
Figure 1-10
6. When the INOmeter is turned OFF (cylinder
closed) the display will show a "-" (negative)
sign (see Figure 1-13 ) and alternate between:
a. Showing - - - on the display (eight seconds).
b. The total cumulative time XXX in hours of
all the ON events (four seconds).
c. The display alternates between a and b
for the indicated times in parenthesis above.
Note: • The INOmeter is used to open and
close the cylinder valve.
• Counter-clockwise rotation of the
INOmeter serves to open the cylinder
valve (see Figure 1-12).
• Clockwise rotation acts to close the
cylinder valve (see Figure 1-13).
Note: If display is blank, replace cylinder.
Note: If display is blank, replace cylinder.