Mallinckrodt INOMAX DSir Plus, Operation Manual

Page: 162 / 206

Part No. 20717 Rev-01
2014-07
6-12
6. Open the INOcal cylinder valve (turn counter-
clockwise) to flow gas.
6a. If the pressure is in the red or black zone (0-
25 psig) select another INOcal cylinder.
7. Attach tubing kit to patient gas sample line.
9a. To continue the high calibration wizard, press
the NEXT button.
9b. To start the high calibration without using the
wizard, press the START CAL button.
9c. To exit the NO
2
high calibration wizard, press
the CANCEL button.
8. From the high calibration screen
(third menu level), press the 10 ppm
NO
2
button to initiate the NO
2
high
calibration.
9b 9a 9c
Note:
If the date is flashing on the high
calibration screen, the calibration is past
due.
Note: Cap off sample tee if patient gas sample
line is removed from patient breathing
circuit.
To INOmax DS
IR
7
6
6a