Mallinckrodt INOMAX DSir Plus, Operation Manual

Page: 112 / 206

Part No. 20717 Rev-01
2014-07
4-4
Remove
Replace
10
12
14
11
15
10. Loosen clamp assembly knob on the back of the INOmax DS
IR
and remove the INOmax DS
IR
from the cart.
11. Loosen clamp assembly knob on the back of the INOblender and remove the INOblender from the cart.
12. Place both devices on the transport device and secure.
13. Connect the INOblender inlet hose to the INOmax DS
IR
INOblender outlet and slide the quick-connect
cover into place.
Upon return:
14. Return the INOblender to the cart and secure the clamp assembly.
15. Return the INOmax DS
IR
to the cart and secure the clamp assembly.
16. Connect the INOblender inlet hose to the INOmax DS
IR
INOblender outlet and slide the quick-connect
cover into place.
Note: INOblender extension hose (PN 10014) will be required if the INOMAX DS
IR
and the INOblender
are positioned more than two feet apart.