Diagnostic Manual MAN-00183
MAXXIMO
MINIVAN
VX June 2012
/
Rev
1
The reproduction, translation, transmission, in part of
or
whole of the present document are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any
person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution.
© 2012 Mahindra &
Mahindra Ltd.
51
DTC Detecting Condition
Probable Causes
The crankshaft speed sensor signal is not detected by the ECU in
the first few seconds of engine cranking
The crankshaft speed sensor signal is not in the normal pattern
during engine running
No synchronization between cam shaft and crankshaft signal
Harness or Connectors
Failed crankshaft speed sensor
The air gap between sensor
and trigger wheel is too big
LAMP STATUS
Engine check lamp continuously ON
FAULT REACTION
Engine stops and will not start
CIRCUIT
Summary of Contents for Maxximo Mini Van Vx 2012
Page 274: ......
