Mahindra Maxximo Mini Van Vx 2012, Diagnostic Manual

Page: 34 / 274

Diagnostic Manual MAN-00183
MAXXIMO
MINIVAN
VX June 2012
/
Rev
1
The reproduction, translation, transmission, in part of or whole of the present document are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any
person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution.
© 2012 Mahindra &
Mahindra Ltd.
34
Step 1
Go to Step 5
Does continuity
exist?
YES
Go to Step 4
Go to Step 3

Ignition OFF

Accelerator pedal sensor
connector DISCONNECTED

ECU connector CONNECTED

Check the continuity between
pin A and pin B of the
accelerator pedal sensor
connector
Step 2
NO
Is voltage 3.0 to
3.5V for C04 and
4.75 to5.25V for
C55?
NO YES

Clear the error codes and
verify

Turn ignition OFF

Accelerator pedal sensor
connector
DISCONNECTED

ECU connector
CONNECTED

Turn ignition ON

Measure the voltage
between pin A of the
accelerator pedal connector
and battery negative

Connect the smart tester

Turn the ignition ON

Initialise the diagnostic tool

Record the error codes and clear

Turn ignition OFF

Turn ignition ON

Verify if P0222 or P0223 or
P1120 is present?
Is P0222 or P0223
or
P1120 is present?
YES
NO