Mahindra Maxximo Mini Van Vx 2012, Diagnostic Manual

Page: 155 / 274

Diagnostic Manual MAN-00183
MAXXIMO
MINIVAN
VX June 2012
/
Rev
1
The reproduction, translation, transmission, in part of or whole of the present document are prohibited without the prior written consent of Mahindra & Mahindra Ltd. The use of this document by any
person other than the trained personnel, at the Authorized Service Centre of Mahindra & Mahindra Ltd., will amount to unauthorized use and shall be liable for penalty/prosecution. © 2012 Mahindra &
Mahindra Ltd.
155
Step 2

Turn ignition OFF

Check voltage at terminal
16 of the Diagnostic
connector and battery
negative
Step 1
Is the voltage 12
volts?

Connect the smart tester to the
diagnostic connector

Ignition ON

Check whether smart tester is
connected
YES NO
Go to Step 3

Turn ignition OFF

Check fuse no.12 (10
amps), replace if
necessary

Check wiring harness
between Diagnostic
connector and battery
positive terminal, replace
if necessary
Is the smart
tester is
connected ?
NO
YES

Diagnostic Connector is OK