© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
Dark Yellow Value
Dark yellow values indicates that this value is a tracked value from a normal executor.
4.2. What is the programmer
The Programmer is the temporary place for your values. This is where the values are kept until you store them
somewhere or throw them away.
The Programmer have several levels. When you select a fixture the fixture ID number turns yellow in the fixture view.
You can change the values of the selected fixtures by moving the level wheel or any other way you can change the
values. When you have active values in your programmer they get a red background in the
(sheet
mode). You'll also see red markers in the
When you store something you still have the values in your programmer - they are just not considered
active
anymore.
When you have a selection and values in your programmer, then you can press the
Clear
key once to remove the
selection and
Clear
once more to release the values from the programmer.
If you just want to release something specific you can use the
Off
key and then press what you want to release - to
learn more about off please read about
The Programmer have a higher priority that the executors. This means that if you have a values in your programmer,
then it will not be overwritten by the cues.
You can hide the values in the programmer from the output by pressing the
Blind
key. And bring it back to the
output also by pressing
Blind
.
Related links
4.3. What are groups
86
