MA lighting dot2 XL-F User Manual Download Page 479

Page: 479 / 509

P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m

1 of 1

11.3. CrashLogList Command

This page describes the syntax and how to use the

CrashLogList

command.

To use the CrashLogList command, type

CrashLogList

in the

command line

Description

The CrashLogList command displays in the

command line view

, if a crash log file exist.

To export the crash log file, use the

CrashLogCopy Command

For more information, refer to

Error Handling

Syntax

CrashLogList

Example

Let´s assume, the console crashes and you will check if a crash log file is provided.

1. Type in the command line:

CrashLogList

2. Press

Please

The

command line view

displays, if a crash log file is provided.

11.4. Error Messages

If the following error messages does not help to solve the problem, please call or write an e-mail to the dot2
support.

E-Mail:

[email protected]

Phone: +49 5251 688 865 27
Emergency Phone: +49 5251 688 865 99 (If you are in the middle of a production with problems)

Error

Reason

# 0 Unknown error

The console have an unknown error.

# 1 Unknown command The entered command is unknown.
# 2 Input too long

The entered command is too long.

# 3 Illegal character

The entered command is illegal.

# 4 Command not
implemented

The entered command is not supported from the console.

# 5 Number expected

The console expects a number.

# 6 IP expected

The console expects an IP address.

# 7 Number too long

The entered number is too long.

479

Summary of Contents for dot2 XL-F






























































































































































































































































































































































































































































































































Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands

MA lighting dot2 XL-F, User Manual

Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands