MA lighting dot2 XL-F User Manual Download Page 425

Page: 425 / 509

P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m

1 of 1

Hint:

To double-check the sent MIDI Notes, press

Tools

and tap under column MIDI at in the MIDI Monitor .

For more information, see

MIDI Monitor

Syntax

1. Send MIDI Note with the selected MIDI channel from the

MIDI Show Control window

and full velocity (127).

MidiNote 12

2. Send MIDI Note with defined MIDI channel and full velocity (127).

MidiNote 1.12

3. Send MIDI Note with the selected MIDI channel from the

MIDI Show Control window

and a velocity of 60.

MidiNote 12 60

4. Send a MIDINote Off.

MidiNote 14 Off

Example

Let´s assume, you will send a MIDI note on a specific cue to trigger a sound station.

Requirements:

Connected sound station device e.g. computer on the MIDI Out connector.
Stored cue on an executor.

Open the

cues view

and type in the CMD (= command) column the following syntax:

MidiNote 12

Figure 1: Cues View with MIDI Notes in the CMD column

The MIDI note will be send if the cue is executed and will trigger the connected sound station.

8.39. Move Command

425

Summary of Contents for dot2 XL-F






























































































































































































































































































































































































































































































































Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands

MA lighting dot2 XL-F, User Manual

Search results

Summary of Contents for dot2 XL-F

Reviews:

Brands by name

Popular brands