© 2016 MA Lighting T e chno lo gy Gm bH | Da chde ck e rstr. 16 | D-97297 W a ldbütte lbrunn | Ge rm a ny
P ho ne +49 5251 688865-27 | suppo rt (a t) m a -do t2.co m | www.m a lighting.co m
1 of 1
Description
With the if command you can e.g.
deselect fixtures from the current selection if they are not in a group
limit the
and clones only if the fixtures is stored on an executor
limit the
and deletes only a fixture from a cue
select fixtures only if they are overlapping
Syntax
1. Deselect fixtures from the current selection if not stored in group 1.
If Group 1
2. Limit the clone command.
Clone Fixture 33 If Executor 1
3. Limit the delete command.
Delete Cue 3 If Fixture 1
Example 1
Let´s assume, you will deselect all current selected fixtures if they are not stored in group 1.
Press and hold
+
If
(= If)
Group
1
Please
.
All fixtures which are not stored in group 1 are deselected.
Example 2
Let´s assume, you will clone the fixture 1 only on executor 2, because you need one more fixtures for the actors light.
Press
+
Copy
(= Clone)
Fixture
1
At
33
Thru
35
+
If
(= If) and the respective executor
button
Please
.
The console will ask you to
Fixtures 1 is cloned at fixture 33 thru 35, only on executor 1.
Example 3
Let´s assume, you will delete just fixture 1 from cue 2 on the main executor.
Press
Delete
2
(=Cue 2)
+
If
(= If)
Fixture
1
Please
.
Fixture 1 is deleted from Cue 2 on the main executor.
Example 4
417
