![background image](http://html.mh-extra.com/html/m-system/tr30/tr30_user-manual_683658022.webp)
22
TR30-G USERS MANUAL EM-8631-G Rev.16
3.3.3 Set the IP address
Use TRGCFG to configure the network setting.
(1) Set the [Configuration Select Switch] of the device as [TR30].
(2) Connect the PC and the device using a USB cable.
(3) Start up TRGCFG and click on the [Network] button.
(4) If the [Confirm access mode] is displayed, check that the device is correct, and click on the [Connect] but-
ton.
(5) The [Network] screen is displayed. To set a fixed IP address, select [Manual setting], and set the IP ad-
dress.
(6) Press the [Upload to device] button to transfer the IP address to the TR30 (At this point, the IP address is
not yet changed).
(7) Turn OFF the power supply to the device and turn it ON again to activate the transferred IP address.
TR30 RUN
RECORD
SD CARD
PWR
RUN
ERROR
CFG
DPX
LNK
RECORD
SD CARD
TR30
2
I/O
On
4
3
1
U(
+
)
NC
V(-)
FE
TR30
I/O
Configuration
Select SW
Configuration
Connector
Initial Screen
Network
1. Click
2. Click
Confirm access mode
4. Enter
3. Select
5. Upload to device