manualshive.com logo in svg

M-system TR30, User Manual

Share
Download
M-system TR30 User Manual Download Page 216

216

TR30-G   USERS MANUAL  EM-8631-G  Rev.16

7.3.4  SD card

Item

Description

Type

SDHC

Format

FAT32
Do not use a format other than the one provided by the SD Association for the SD card.

File name

Create a file name using the YYMMDDHHMMSS of the first sample.
Last character

S: Standard time (When Daylight saving time is not used)
D: Daylight saving time

[Example] Memory block conformed: 20130802140000S.TRD
CSV format

Trend
Event
Comment

: 20130802140000S_T.CSV
: 20130802140000S_E.CSV
: 20130802140000S_C.CSV)

Automatic transfer

Automatically transferred during new memory block. 

Folder partitioning

• If the interval is not less than 1 day (Created in the YYMM folder)
     \Y2014\M10\20141012100000S.TRD
• If the interval is less than 1 day (Created in the YYMMDD folder)
     \Y2014\M10\D12\20141012100000S.TRD

Auto file delete

When the remaining space in the SD card becomes 100 MB or less, data files and fold-
ers can be automatically deleted.
If the oldest DD folder exists, below that folder is deleted.
If the oldest MM folder exists, below that folder is deleted.
If the oldest YY folder exists, below that folder is deleted.

 

■

Specified SD card

    NSD6-004GH and NSD6-016GH which are manufactured by Hagiwara Solutions.

 

■

Formatting SD card

When formatting SD card, use a dedicated software “SD Card Formatter”.

“SD Card Formatter” is downloadable at SD Association’s web site.
  https://www.sdcard.org

Summary of Contents for TR30





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands