manualshive.com logo in svg

M-system TR30, User Manual

Share
Download
M-system TR30 User Manual Download Page 146

146

TR30-G   USERS MANUAL  EM-8631-G  Rev.16

Digital display

If the color of the characters is black, it means that the current value is being displayed.
When you scroll the trend graph, the top values of the graph are displayed, and the color of the characters 
becomes blue.
Tap the [Digital display] to make the pen selected.  The background becomes black.
To unselect the pen, tap the [Scale].

NOTES

•  The changed display status (%, scaling value) is only enabled while the [Trend] screen is 

being displayed.

•  The value changed in [Reset local calibration] can be cleared.

➔

 4.12.4 Reset local calibration

•  The most updated trend data is read in for display.  Past trend data can be read in when the 

chart is scrolled down to the point where the figures in the digital displays are in blue color.

Scroll the trend graph

Tap

Tap

Pen selected

Trend stopped

Pen color

CH name

CH comment

Digital display

% display

Bargraph

Summary of Contents for TR30





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands