manualshive.com logo in svg

M-system TR30, User Manual

Share
Download
M-system TR30 User Manual Download Page 188

188

TR30-G   USERS MANUAL  EM-8631-G  Rev.16

4.12.4  Reset local calibration

You can reset the setting values such as the maximum and minimum values for each pen in the trend graph.

(1)  Tap the [Reset local calibration] button from the [Setting].

(2)  The confirmation dialog [OK to reset local calibration?] is displayed.  Tap the [OK] button.
(3)  The local adjustment value is reset, and the trend graph position returns to the reset value.

NOTES

The [Reset local calibration] sub-menu is displayed only in the [Trend] screen.

CAUTION

Some browsers such as Google Chrome and Firefox may display check boxes such as [Do 
not generate any more dialog boxes], or [Suppress additional dialog display], but do not check 
them.  If you check them, subsequent dialogs are not displayed, and this also prevents the op-
eration of displaying the confirmation dialog. 

➔

 7.2.3 Web server

Tap

Summary of Contents for TR30





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands