manualshive.com logo in svg

M-system TR30, User Manual

Share
Download
M-system TR30 User Manual Download Page 208

208

TR30-G   USERS MANUAL  EM-8631-G  Rev.16

7.2  Troubleshooting

7.2.1  Lamp display

Problem faced

Checks to be done

Method of handling

The PWR LED does not 
come on.

Is the tablet recorder powered ON?

Check the power supply.

The RUN LED does not 
come on.

Perform the same checks as in 
[7.2.8 Error display lamp].

----

The TR30 RUN LED does 
not come on.

Is the tablet recorder powered ON?

Check the power supply.

Has the IP address been set?

Set the IP address.

➔

 3.3.3 Set the IP address

The ERROR LED is blinking.

Perform the same checks as in 
[7.2.8 Error display lamp].

7.2.2  SD card

Problem faced

Checks to be done

Method of handling

Unable to record in the SD 
card.

Has the SD card been inserted?
(Is the SD CARD lamp ON?)

Insert an SD card specified by us.

➔

 7.3.4 SD card

Is the RECORD lamp ON?

Keep the [RECORD] button in the TR30 pressed 
for at least 1 second.

➔

 5.2 Recording

If there space available for storage 
on the SD card?

Check for space availability, and delete unnec-
essary data from the SD card.

➔

 6.1.2 Maintenance  ‘Disk usage status’

Unable to find the latest TRD 
file in the SD card.

Has the memory block data been 
transferred to the SD card?

Transfer the data to the SD.

➔

 4.9.2 Operation  ‘Transfer data to the SD card’

7.2.3  Web server

Problem faced

Checks to be done

Method of handling

There is no response when 
a logging button and menu 
button are pressed.

Is the confirmation dialog being 
displayed?

Close and restart the browser. 

Summary of Contents for TR30





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands