manualshive.com logo in svg

M-system TR30, User Manual

Share
Download
M-system TR30 User Manual Download Page 171

171

TR30-G   USERS MANUAL  EM-8631-G  Rev.16

Transfer data to the SD card

You can forcibly transfer memory block data to the SD card.

(1)  Tap the memory block whose data you want to transfer to the SD card.  The row containing the selected 

memory block turns blue in color.

(2)  Tap the [Menu button 

 ].

(3)  Tap [Transfer to SD 

 ] in the sub-menu.

(4)  The confirmation dialog [no.x : Are you sure to transfer to SD card?] is displayed.  Tap the [OK] button.
(5)  After data transfer, the [OK] is displayed.  Tap the [OK] button.
 

The data remains in the memory block even after the transfer.

CAUTION

•  A memory block which is being recorded cannot be transferred to the SD card.  To move a 

memory block which is currently being recorded to the SD card, perform the New memory 
block operation.

•  If there is a file with the same name in the destination folder in the SD card, it is overwritten.
•  Some browsers such as Google Chrome and Firefox may display check boxes such as [Do 

not generate any more dialog boxes], or [Suppress additional dialog display], but do not 
check them.  If you check them, subsequent dialogs are not displayed, and this also pre-
vents the operation of displaying the confirmation dialog.

➔

 7.2.3 Web server

•  When data is transferred manually, the SD card file format set at that time is applied.

➔

 3.10 Recording method setting  ‘SD card file format

1. Select

2. Tap

3. Tap

4. Tap

5. Tap

Summary of Contents for TR30





















































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands