32
TR30-G USERS MANUAL EM-8631-G Rev.16
NOTES
The parameters for which the engineering unit value is set in TRGCFG can be set between
±10,000,000,000.
The maximum number of digits that can be entered after the decimal point equals the number
of digits which is displayed on the screen.
For example, since the scale 0% for the analog input has an initial value of 0.000, when
[123.4567890] is entered, it is rounded off to 3 digits after the decimal point to match the
initial value 0.000, and therefore becomes [123.457]. (The 4th digit after the decimal point is
rounded off)
When the exponent notation is specified, the mantissa is rounded off to 3 digits after the deci-
mal point, and therefore the value is described as [1.235 e +2].
CAUTION
The number of usable channels and pens depends upon the storing rate. Refer to [3.10 Re-
cording method setting] for the limitations.