122
TR30-G USERS MANUAL EM-8631-G Rev.16
3.11.3 SNTP
You can automatically correct the time using the SNTP client function built into the TR30.
Automatic time correction is done at power on and 00:00, 06:00, 12:00 and 18:00 hours.
(1) Set the [Configuration Select Switch] of the device as [TR30].
(2) Connect the PC in which TRGCFG is installed with the device, and start up TRGCFG.
(3) Click on the [Download from device] button.
(4) If the [Confirm access mode] is displayed, check that the device is correct, and click on the [Connect] but-
ton.
(5) Once the setting information has been loaded from the device, the [Configuration] is displayed.
TR30 RUN
RECORD
SD CARD
PWR
RUN
ERROR
CFG
DPX
LNK
RECORD
SD CARD
TR30
2
I/O
On
4
3
1
U(
+
)
NC
V(-)
FE
TR30
I/O
Configuration
Select SW
Configuration
Connector
Initial Screen
Confirm access mode
Configuration
1. Click
2. Click