Manual
LCom
Page 94 of 158
Note that the IP address provided by the GPRS provider must be “public” (i.e. not
blocked behind a firewall) in order to be able to connect to the LCom (and use the
DynDNS service) !
for details about the DynDNS service.
•
DynDNS active
: The DynDNS client is active
•
DynDNS Domain
: The DynDNS host/domain name for this station (must be
created in advance at DynDNS.com)
•
User
: The DynDNS user (for which the domain has been registered)
•
Password
: The DynDNS password for the user
•
Check interval:
The interval/delay in seconds after which the current IP
address upload to the DynDNS server is repeated if the last attempt failed,
and after which a check is made -
via a ping to the DynDNS name if “use ping”
is enabled (see below)
– to check whether the DynDNS name was correctly
registered. If successive errors occur (5 x), the GPRS connection (and the
GPRS modem) are reset.
•
Use ping:
The DynDNS registration is checked by sending a ping request to
the DynDNS name (see Check interval).
