Lucent Technologies LambdaUnite, Installation Manual, Page: 525 / 628

.................................................................................................................................................................................................
8
Select in the
Source
group box via the
Port
drop-down list box the port to which
“analyzer 1” is connected.
.................................................................................................................................................................................................
9
Select in the
Source
group box via the
Trib
drop-down list box the desired tributary.
.................................................................................................................................................................................................
10
Select in the Destination group box via the Node IP drop-down list box the SCN IP
address of NE-C (see section “Setting the IP address and ONNS system parameters of
the SCN nodes” (p. 10-81) ).
.................................................................................................................................................................................................
11
Select in the
Destination
group box via the
Port
drop-down list box the port to which
“analyzer 2” is connected.
.................................................................................................................................................................................................
12
Select in the Destination group box via the Trib drop-down list box the desired
tributary.
.................................................................................................................................................................................................
13
Select
Auto-Revertive
in the
Protection Type
drop-down list box.
.................................................................................................................................................................................................
14
Select
Bidirectional
in the
Direction
group box.
.................................................................................................................................................................................................
15
Click the
Constraints
tab.
.................................................................................................................................................................................................
16
Click the Explicit radio button in the Node List .
.................................................................................................................................................................................................
17
Click the
Edit {
button in the
Path 1+2
field.
Result:
The
Explicit Routing Node List Selection Dialog
appears.
.................................................................................................................................................................................................
18
In the Available Nodes field select the SCN IP addresses of NE-B and NE-D and then
click the
Add >
button.
Result: The SCN IP addresses of NE-B and NE-D will appear in the Selected
Nodes
list.
.................................................................................................................................................................................................
19
Click
OK
.
Network establishment and testing Path creation test
.................................................................................................................................................................................................................................
365-374-187
Issue 1, December 2005 Lucent Technologies - Proprietary
See notice on first page
10-95