Lucent Technologies LambdaUnite, Installation Manual, Page: 504 / 628

.................................................................................................................................................................................................
7
Select the existing
Path Protection
in the
Ptn Grp
tab on the left-hand side of the
window and click the
Select
button.
.................................................................................................................................................................................................
8
Check that “Protection” is indicated as the
Active
path.
.................................................................................................................................................................................................
9
Click Close .
.................................................................................................................................................................................................
10
In the WaveStar
®
CIT
System View
, select
Fault
→
Protection Switch {
.
Result:
The
Protection Switch
window appears.
.................................................................................................................................................................................................
11
Select the existing Path Protection in the Ptn Grp tab on the left-hand side of the
window and click the
Select
button.
.................................................................................................................................................................................................
12
From the Switch Type drop-down list box, select Clear .
.................................................................................................................................................................................................
13
Click
Apply
and then
Yes
in the confirmation window.
.................................................................................................................................................................................................
14
From the
Switch Type
drop-down list box, select
Manual To Working
.
.................................................................................................................................................................................................
15
Click Apply and then Yes in the confirmation window.
Result:
An immediate switch to the “Working” path is caused (a short traffic
interruption of about 15 ms can be observed).
.................................................................................................................................................................................................
16
From the
Switch Type
drop-down list box, select
Clear
to clear the protection switch.
.................................................................................................................................................................................................
17
Click
Apply
and then
Yes
in the confirmation window.
.................................................................................................................................................................................................
18
Click Close .
.................................................................................................................................................................................................
19
In the WaveStar
®
CIT
System View
, select
View
→
Protection...
.
Network establishment and testing SNCP/UPSR test
.................................................................................................................................................................................................................................
10-74 Lucent Technologies - Proprietary
See notice on first page
365-374-187
Issue 1, December 2005