363-206-295
Administration and Provisioning
8-42
Issue 1
December 1997
Notes
1.
Default means factory default (the CIT prompts display current provisioned values).
2.
To view the current values, precede these commands with •rtrv- instead of •set-.
*
When security is enabled, this command is available to privileged users only (default is
“disable”).
†
AUTO means the port or channel is ready to be automatically provisioned via signal detection.
‡
This command is restricted to privileged users only.
¶
Setting this parameter also affects DS1 output source and sync output mode. See
set-sync
command in Section 11, Commands and Reports.
§
(X) indicates multiple parameters. See the command pages of ent-ulsdcc-l4.