363-206-295
Administration and Provisioning
8-38
Issue 1
December 1997
Switch Selectable Parameters
8
Table 8-10 describes the parameters provisionable via hardware switches. Refer
to the command pages in Section 11, "Commands and Reports," for a complete
explanation of parameters. Additional information on the shelf and other
parameters is provided in the "Identifiers" part immediately following Table 8-11.
Table 8-10. Parameters Provisionable via Hardware Switches
Parameter
Range
Pack
Command
(Note)
Product ID (S1)
"Product Type"
SYSCTL
rtrv-ne
Optical transmitter power
high, low
21G/21G-U OLIU
rtrv-oc3
DS1 reference format
∗
DS1 reference line coding
∗
Shelf timing mode
SYNC output LBO †
DS1 Output
SF, ESF
AMI,B8ZS
free-running, external DS1, line timed
5 settings (cable dependent)
MULT/SYNC OUT
TG
TG
TG
TG
TG
rtrv-sync
rtrv-sync
rtrv-sync
rtrv-sync
rtrv-sync
3DS3 LBO
2 settings (cable dependent)
3DS3
3STS1E LBO
2 settings (cable dependent)
3STS1E
Note:
Current switch settings except 3STS1E LBO, SYNC Output LBO, 3DS3 LBO, and TBOS
termination can be reported using CIT.
∗
For both DS1 in and out.
†
Operational only when in SYNC OUT mode.