1
Chapter 6. Function Description
6.6 User Group (USR_[][])
User group can be generated by collecting the frequently-used function codes, and it also can be created by using the
existing function codes for the specific application.
6.6.1 Jump code (USR_00)
Jumping directly to any parameter code can be accomplished using USR_00.
(Example) Jumping to USR_03
Press [PROG] key first and set 3 using [
▲
(Up)], [
▼
(Down)], [SHITF/ESC] and press [ENT] key to jump to USR_03. If
the desired code cannot be accessed or void, it automatically jumps to closest code.
After jumping, it is available to jump to other codes using [
▲
(Up)], [
▼
(Down)].
6.6.2 Macro
1) USR _01 (Macro Init)
The initialization of the code type can be defined according to the application the user defines.
Code
LCD display
Description
Setting range
Unit
Factory setting
USR_01
Macro Init
Use Macro Definition
User Define
E/L
User Define
2) USR_02(User Save)
This enables the code type and the set value which the user define to be saved into the memory.
3) USR_03(User Recall)
This enables the code type and the set value saved by USR_02(‘User Save’) to be recalled from the memory.
Code
LCD display
Description
Setting range
Unit
Factory setting
USR_02
User Save
User data save selection
No
Yes
No
USR_03
User Recall
Recall saved user data
No
Yes
No
6.6.3 User code define (USR_04 ~ 67)
It displays the type and value of the user code when [PROG] key is pressed. The code can be set in the same manner
as the codes in the other group can be. If the code is ‘User Grp’ and its set value is ‘Not Used’, the code can be changed
by pressing the [PROG] key once more.
USR
▶
User Recall
03 --- No ---