Assembly- and Installation
Instructions
Lohberger Heiztechnik
GmbH
N28/HB N28/GB
Seite 20
Lohberger Heiztechnik GmbH, A-5020 Salzburg-Bergheim, Rechtes Salzachufer 40
Tel. 0662-450444-0, Fax-DW 9
Es gelten unsere aktuellen allgemeinen Geschäftsbedingungen. Irrtum, Druckfehler und technische Änderungen vorbehalten
7.4
Fitting of control units
Disassemble design panel control
unit
Connect control unit cable
Disassemble design panel control
unit. First, loosen the flat screws
and slide the panel upwards
slightly, so that it is disengaged
from the hooks.
Lead the loose control unit cable
through the opening.
Connect the control unit cable to
the control unit casing.
Assemble control unit
Assemble design panel control
unit
Clip the the control unit to the
control unit carrier by hinging
the holders to the left of the
control unit casing and then hock
the right clip into place.
Assemble design panel control
unit. First hinge with the hooks
and then fix it with the flat
screws.
7.5
Fitting front cover
Fitting front cover
Take the front cover and push it over the
front plate, where the STL is mounted, until
the lid rests completely on the side panels.
Then fix the lid with sheet-metal screws at
the front and rear.
