Assembly- and Installation
Instructions
Lohberger Heiztechnik
GmbH
N28/HB N28/GB
Seite 11
Lohberger Heiztechnik GmbH, A-5020 Salzburg-Bergheim, Rechtes Salzachufer 40
Tel. 0662-450444-0, Fax-DW 9
Es gelten unsere aktuellen allgemeinen Geschäftsbedingungen. Irrtum, Druckfehler und technische Änderungen vorbehalten
5
Instructions for boiler installation
5.1
Unhinge door & pulling out ash pan
Before lifting the boiler off the pallet, we recommend unhinging the ash door and pull out the ash
pan. If necessary you can also disassemble the ash pan lever. Please put them down carefully to
avoid any damage
Please do not unscrew the hinges on the boiler side panels as the doors might be-
come misaligned and the alignment to the ash pan can no longer be guaranteed.
Unhinge door
Open ash pan lever
Pull out ash pan
5.2
Lifting the boiler off the pallet/transport cross-tie
There are two possible ways to lift the boiler off the pallet. At least two persons should always lift
the boiler off the pallet.
Lift the boiler off the pallet using a chain fixed to the two eyelets on the lid. (previous re-
moval of the circuit board plate necessary).
Using a lift truck if the ash door has been un-mounted and the fitted transport cross-ties.
For this means, build a ramp (we recommend the use of a 2.5-metre wide sheet of ply-
wood), strengthen the ramp sufficiently with square timber, and line it up flush to the pal-
let. Screw the pallet to the ramp to prevent it from sliding off.
Un-mount ash pan lever
Eyelets on the boiler lid
Remove transport cross-ties
Fitting of transport cross-ties
5.3
Documentation on ash-door plate / transport-damage information
You find the technical documentation attached to the boiler's upper door. Before starting with the
assembly please read the documentation. Additionally, you will find information attached to the
upper door on how to deal with damage caused during transport.
