39
206-4218
Log In to the OAT100R and Access the Main Menu
Note:
The OAT100R must be connected to an IP network for SSH client access. For direct
access to the OAT100R Service Port, use the FTDI TTL-USB cable (P/N TTL-232R-5V-AJ).
See also “Network and Communication Setup” on page 22 for further information.
If necessary, consult the system administrator to obtain the “admin” user password before
proceeding.
1. Establish communication with the OAT100R using an SSH client or via a direct connection
to the OAT100R Service Port.
Once communication is established, you should see a login prompt. (If the login prompt is
not automatically displayed, press
Enter
to refresh the screen.)
2. At the
login as:
prompt, type
admin
and press
Enter
.
3. At the
password:
prompt, type the admin user password and press
Enter
.
4. At the
Command >
prompt, either:
• Press
Enter
to display the OAT100R Main Menu (see example below).
• Type the desired command and press
Enter
.
The following sections describe each of the configuration commands.
Note:
You can always press
Enter
at the
Command >
prompt to display the OAT100R Main
Menu.
Example: OAT100R Main Menu
---------
Main Menu
---------
info
System information
monitor
System monitor
map
System program map
tuner
Tuner Menu
setup
Setup Menu
update
Update Menu
reset
System reset
exit
End session
Command >
Configuration Options via Command Line
