28
206-4218
(Continued from previous page)
When you click “Set,” the system will also search for and then identify the program(s), if any,
found for the selected channel, for example:
or
Refer to the “Program Mapping” section below for information on assigning programs to
transport streams.
Note:
The system does not determine whether a particular channel is valid for your system; it
only determines if a “Change Channel” operation is successful.
Program Mapping
After a tuner channel is set, input programs are initially assigned to transport streams (output
programs) in numerical order. If more than eight programs were found, the first eight will be
assigned. In the Program Mapping section of the Tuner Menu screen, you can edit the program
assignments, as desired.
1. Edit the program number in each Input Program field, as required. Note that duplicate
input program numbers are not allowed. Type
NC
, if necessary, to indicate “no connection.”
2. When you have completed the fields as required, click on the
Set
button at the bottom of the
Input Program column to confirm your settings.
If you successfully set the program mapping parameters, the system will display
at
the bottom of the Tuner Information display.
Power the Tuner On or Off
In the Tuner Power section of the Tuner Menu screen, you can power ON or power OFF the
tuner.
• To power ON the tuner, click on the
On
button.
• To power OFF the tuner, click on the
Off
button.
In each case, if the action is completed successfully, the system will display
at the
bottom of the Tuner Information display. However, note that the power ON process may take
up to 90 seconds as tuner firmware is reloaded. If desired, you can track the tuner progress
via the command line interface Tuner Menu “info” command (see “View Tuner Information” on
page 43 for further information).
Note:
If a Tuner is powered off, the Power State column in the Tuner Information screen will
indicate this status.
Input Channel Options
The Input Channels screen enables you to scan for available off air RF channels for the
selected tuner(s) and also enables you to assign tuner channels. To access the Input Channels
screen, click on
Input Channels
in the options panel at the left of the screen (see example on
following page).
Configuration Options via GUI (Cont.)
