36
206-4218
(Continued from previous page)
2. When you have completed the assignments, click on the
Set
button at the bottom of the
Tuner column.
Note:
The system will display an error message and will not allow you to continue if you
attempt to map one tuner to multiple streams.
3. If no errors (i.e., duplicate tuners) are detected, the system will display a pop-up window
prompting for confirmation of the changes. Either:
• Click
OK
to confirm and apply the new assignments.
• Click
Cancel
to return to the MUX Setup screen without saving your changes.
If you successfully change the tuner/output assignments, the system will display
below the MUX Setup screen. This operation typically takes up to 20 seconds
OAT100R Maintenance Options
The Maintenance screen enables you to update firmware and reset the system. To access the
Maintenance screen, click on
Maintenance
in the options panel at the left of the screen.
Configuration Options via GUI (Cont.)
Typical
Maintenance
Screen
