Lexmark Z31 Color Jetprinter, User Manual

Page: 50 / 58

Appendix
46
changes or modifications could void
the user's authority to operate this
equipment.
To assure compliance with FCC
regulations on electromagnetic
interference for a Class B computing
device, use a properly shielded and
grounded cable such as Lexmark part
number 1329605. Use of a substitute
cable not properly shielded and
grounded may result in a violation of
FCC regulations.
Any questions regarding this
compliance information statement
should be directed to:
Director of Lab Operations
Lexmark International, Inc.
740 New Circle Road NW
Lexington, KY 40550
(606) 232-3000
Notices
Industry Canada
Compliance Statement
This Class B digital apparatus meets all
requirements of the Canadian
Interference-Causing Equipment
Regulations.
Avis de conformité aux
normes d’Industrie
Canada
Cet appareil numérique de la classe B
respecte toutes les exigences du
Règlement sur le matériel brouilleur du
Canada.
European Community
(EC) directives conformity
This product is in conformity with the
protection requirements of EC Council
directives 89/336/EEC and 73/23/EEC
on the approximation and
harmonization of the laws of the
Member States relating to
electromagnetic compatibility and
safety of electrical equipment designed
for use within certain voltage limits.
A declaration of conformity with the
requirements of the Directive has been
signed by the Director of
Manufacturing and Technical Support,
Lexmark International, S.A., Boigny,
France.
This product satisfies the Class B limits
of EN 55022 and safety requirements
of EN 60950.
Japanese VCCI notice
The United Kingdom
Telecommunications Act
1984
This apparatus is approved under the
approval number NS/G/1234/J/100003
for the indirect connections to the
public telecommunications systems in
the United Kingdom.
Energy Star
The EPA ENERGY STAR Computers
program is a partnership effort with
computer manufacturers to promote the
introduction of energy-efficient
products and to reduce air pollution
caused by power generation.
Companies participating in this
program introduce personal computers,
printers, monitors, or fax machines that
power down when they are not being
used. This feature will cut the energy
used by up to 50 percent. Lexmark is
proud to be a participant in this
program.
As an Energy Star Partner, Lexmark
International, Inc. has determined that
this product meets the Energy Star
guidelines for energy efficiency.
Power Supply
Information
If your power supply fails, replace it
with the Lexmark replacement part or
other UL LISTED Direct Plug-In
Power Unit marked “Class 2" and rated
30 Vdc at 830 mA.
Safety information
• If your product is NOT marked with this
symbol
, it MUST be connected to an
electrical outlet that is properly
grounded.
• The power supply must be connected to
an electrical outlet that is near the prod-
uct and easily accessible.
• Refer service or repairs, other than those
described in the operating instructions, to
a professional service person.
• This product is designed, tested and
approved to meet strict global safety
standards with the use of specific Lex-
mark components. The safety features of
some parts may not always be obvious.
Lexmark is not responsible for the use of
other replacement parts.
Consignes de sécurité
• Si le symbole n'apparaît PAS sur
votre produit, ce dernier DOIT être
branché sur une prise de courant mise à
la terre.
• Le câble d'alimentation doit être con-
necté à une prise de courant placée près
du produit et facilement accessible.
• L'entretien et les réparations autres que
ceux décrits dans les instructions
d'emploi doivent être effectués par le per-
sonnel de maintenance qualifié.
• Ce produit a été conçu, testé et approuvé
pour respecter les normes strictes de
sécurité globale lors de l'utilisation de
composants Lexmark spécifiques. Les
caractéristiques de sécurité de certains
éléments ne sont pas toujours évidentes.
Lexmark ne peut être tenu responsable
de l'utilisation d'autres pièces de
rechange.
Norme di sicurezza
• Se il prodotto NON è contrassegnato con
questo simbolo
DEVE essere colle-
gato lo stesso ad una presa elettrica con
messa a terra.
• Il cavo di alimentazione deve essere col-
legato ad una presa elettrica posta nelle
vicinanze del prodotto e facilmente rag-
giungibile.
• Per la manutenzione o le riparazioni,
escluse quelle descritte nelle istruzioni
operative, consultare il personale di
assistenza autorizzato.
• Il prodotto è stato progettato, testato e
approvato in conformità a severi standard
di sicurezza e per l’utilizzo con compo-
nenti Lexmark specifici. Le caratteris-
tiche di sicurezza di alcune parti non
sempre sono di immediata compren-
sione. Lexmark non è responsabile per
l’utilizzo di parti di ricambio di altri
produttori.