manualshive.com logo in svg

Lexmark Optra Color 45, User Manual, Page: 290 / 331

Share
Download
Lexmark Optra Color 45 User Manual Download Page 290

Safety

273 

Sa
fe

ty

Reference

Safety

Safety Information

•

If your product is NOT marked with this symbol 

, it MUST be 

connected to an electrical outlet that is properly grounded.

•

The power cord must be connected to an electrical outlet that is near the 
product and easily accessible.

•

Refer service or repairs, other than those described in the operating 
instructions, to a professional service person.

•

This product is designed, tested and approved to meet strict global 
safety standards with the use of specific Lexmark components. The 
safety features of some parts may not always be obvious. Lexmark is not 
responsible for the use of other replacement parts.

Consignes de sécurité 

•

Si le symbole 

 n'apparaît PAS sur votre produit, ce dernier DOIT être 

branché sur une prise de courant mise à la terre.

•

Le câble d'alimentation doit être connecté à une prise de courant placée 
près du produit et facilement accessible.

•

L'entretien et les réparations autres que ceux décrits dans les 
instructions d'emploi doivent être effectués par le personnel de 
maintenance qualifié.

Summary of Contents for Optra Color 45












































































































































































































































































































































Reviews:

No comments