Lexmark Optra Color 45 User Manual Download Page 263

Page: 263 / 331

Chapter 10: Infrared Adapter

246

Inf

rare

apt

Installing Options

Plug the adapter cable into the infrared port.

Reconnect the power cord to the printer and a properly
grounded electrical outlet.

If any light on the infrared adapter comes on when the
printer is plugged in, the adapter is connected to the port
correctly.

Aim the computer infrared port at the infrared port on the
front of the Tri-Port interface option card.

Refer to the documentation that came with your computer
for information about your computer infrared port.

Summary of Contents for Optra Color 45












































































































































































































































































































































Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands

Lexmark Optra Color 45, User Manual

Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands