Lexmark Optra Color 45 User Manual Download Page 260

Page: 260 / 331

243

Chapter 9: Memory and Option Cards

Memory and O

tion Cards

Installing Options

Closing the Printer System Board on the
Right Side of the Printer

Complete the following steps after you install an option card:

Insert the four tabs on the top of the system board access
cover into the slots on the printer as shown.

Slide the system board access cover to the left until it
snaps into place.

Reconnect all cables to the back of the printer.

Reconnect the power cord to the printer and a properly
grounded electrical outlet.

Make sure the

Ready

message appears on the operator

panel display.

If an error message appears, see “Understanding Printer
Messages” on page 145.

Note:

To verify that the option card is installed properly,
see “Verifying the Installation of Options” on
page 249.

Tabs

Slots

Summary of Contents for Optra Color 45












































































































































































































































































































































Search results

Summary of Contents for Optra Color 45

Reviews:

Lexmark Optra Color 45, User Manual, Page: 260 / 331

Search results

Summary of Contents for Optra Color 45

Reviews: