Lexmark Optra Color 45 User Manual Download Page 234

Page: 234 / 331

217

Chapter 9: Memory and Option Cards

Memory and O

tion Cards

Installing Options

Rotate the memory option

to a 45° angle and gently

pull it out of the connector as shown.

Place the printer memory option in its original packaging.

If you did not save the packaging, wrap the memory option
in paper and store it in a box.

If you need to install a new memory option, see
“Installing a Printer Memory Option” on page 213.

Continue with “Closing the Printer System Board under
the Input Tray” on page 218.

Summary of Contents for Optra Color 45












































































































































































































































































































































Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands

Lexmark Optra Color 45, User Manual

Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands