Lexmark Optra Color 45 User Manual Download Page 181

Page: 181 / 331

Chapter 6: Solving Printer Problems

164

Sol

ing P

rinter P

roblems

Caring for Your Printer

Display Problems

Problem

Action

Menus Disabled

status message
appears on the
display.

The operator panel menus are disabled. To enable the
menus:

• Unplug the printer.
• Press and hold

and

Stop

, and then plug the

printer back in.

• Release the buttons when

Performing Self Test

displays.

Display shows only
diamonds or is
blank.

Unplug the printer, wait about 10 seconds, and plug the
print back in. The

Performing Self Test

message

appears on the operator panel display. When the test is
completed, the

Ready

message displays.

If the messages do not display, unplug the printer and
call for Lexmark Technical Support.

Menu settings
changed from the
operator panel
have no effect.

Settings in the software application, the printer driver,
or the printer utilities are overriding the settings in the
operator panel.

• Change the menu settings from the printer driver, the

printer utilities, or the software application instead of
the operator panel.

• Disable the settings in the printer driver, the printer

utilities, or the software application.

Summary of Contents for Optra Color 45












































































































































































































































































































































Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands

Lexmark Optra Color 45, User Manual

Search results

Summary of Contents for Optra Color 45

Reviews:

Related manuals for Optra Color 45

Brands by name

Popular brands