Lexmark MX-B557P User Manual Download Page 187 | Manualshive

Page: 187 / 217

background image

3

Unpack the optional tray, and then remove all packing material.

Note:

If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

4

Align the printer with the optional tray, and then lower the printer until it

clicks

into place.

CAUTION—POTENTIAL INJURY:

If the printer weight is greater than 20 kg (44 lb), then it may

require two or more people to lift it safely.

5

Connect the power cord to the printer, and then to the electrical outlet.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

6

Turn on the printer.

Add the tray in the print driver to make it available for print jobs. For more information, see

“Adding available

options in the print driver” on page 202

Installing the 2100

‑

sheet tray

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.

CAUTION—TIPPING HAZARD:

Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported conﬁgurations, contact the place where you purchased the printer.

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet, and then from the printer.

3

Unpack the tray, and then remove all packing material.

Note:

If optional trays are already installed, then unlock them from the printer before lifting the printer. Do

not try to lift the printer and trays at the same time.

4

Install the tray on the caster base.

Upgrading and migrating

187

«
...
185
186
187
188
189
...
»

Summary of Contents for MX-B557P


























































































































































































































Reviews:

No comments

Related manuals for MX-B557P

Brand: Oki Pages: 2

Brand: Oki Pages: 28

Brand: Duplo Pages: 123

Brand: Edimax Pages: 93

Brand: Xerox Pages: 13

Brand: Ricoh Pages: 60

Brand: IriSys Pages: 21

INFOPRINT HI-LITE COLOR 4005-HC2

Brand: IBM Pages: 10

Brand: RAYSHAPE Pages: 41

Brand: MHM Pages: 52

Brand: Wasp Pages: 73

imagePROGRAF PRO-6600

Brand: Canon Pages: 939

Brand: Epson Pages: 16

Brand: Epson Pages: 2

CX3810 - Stylus Color Inkjet

Brand: Epson Pages: 36

CX3810 - Stylus Color Inkjet

Brand: Epson Pages: 2

CX4200 - Stylus Color Inkjet

Brand: Epson Pages: 48

CX5000 - Stylus Color Inkjet

Brand: Epson Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands