Lexmark MX-B557P User Manual Download Page 154

Page: 154 / 217

Action

Yes

Step 1

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Is the print light?

Go to step 2.

The problem is
solved.

Step 2

Turn off the printer, wait for about 10 seconds, and then turn on
the printer.

Increase toner darkness. From the control panel, navigate to:

Settings

Print

Quality

Toner Darkness

Print the document.

Is the print light?

Go to step 3.

The problem is
solved.

Step 3

Depending on your operating system, specify the paper type
from the Printing Preferences or Print dialog.

Notes:

•

Make sure that the setting matches the paper loaded.

•

You can also change the setting on the printer control
panel. Navigate to

Settings

Paper

Tray Conﬁguration

Paper Size/Type

Print the document.

Is the print light?

Go to step 4.

The problem is
solved.

Step 4

Check if the print resolution is set to 600 dpi.

From the control panel, navigate to:

Settings

Print

Quality

Print Resolution

Print the document.

Is the print light?

Go to step 5.

The problem is
solved.

Step 5

Check the status of the toner cartridge, and replace if necessary.

From the control panel, navigate to:

Status/Supplies

Supplies

Print the document.

Is the print light?

Contact your

dealer

. The problem is

solved.

Troubleshooting

154

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands