Lexmark MX-B557P User Manual Download Page 20

Page: 20 / 217

Loading paper and specialty media

Setting the size and type of the specialty media

The trays automatically detect the size of plain paper. For specialty media like labels, card stock, or envelopes,
do the following:

From the home screen, navigate to:

Settings

Paper

Tray Conﬁguration

Paper Size/Type

> select a paper source

Set the size and type of the specialty media.

Conﬁguring Universal paper settings

From the control panel, navigate to:

Settings

Paper

Media Conﬁguration

Universal Setup

For non-touch-screen printer models, press

to navigate through the settings.

Conﬁgure the settings.

Loading the 250

‑

or 550

‑

sheet tray

CAUTION—POTENTIAL INJURY:

To reduce the risk of equipment instability, load each tray separately.

Keep all other trays closed until needed.

Remove the tray.

Note:

To avoid paper jams, do not remove trays while the printer is busy.

Adjust the guides to match the size of the paper that you are loading.

Note:

Use the indicators on the bottom of the tray to position the guides.

Loading paper and specialty media

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands