Lexmark MX-B557P User Manual Download Page 23

Page: 23 / 217

•

Load envelopes with the ﬂap side up and against the left side of the tray.

Warning—Potential Damage:

Do not use envelopes with stamps, clasps, snaps, windows, coated

linings, or self

‑

stick adhesives.

Insert the tray.

From the control panel, set the paper size and paper type to match the paper loaded.

Loading the 2100

‑

sheet tray

CAUTION—TIPPING HAZARD:

To reduce the risk of equipment instability, load each tray separately.

Keep all other trays closed until needed.

Pull out the tray.

Adjust the guides.

Loading A5

‑

size paper

Pull up and slide the width guide to the position for A5.

Loading paper and specialty media

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands