Lexmark MX-B557P User Manual Download Page 89

Page: 89 / 217

Menu item

Description

Print Demo

Demo Page

Print a page that shows the printer capabilities and supported solutions.

Print Directory

Print the resources that are stored in the ﬂash drive or printer hard disk.

Note:

This menu item appears only when a ﬂash drive or printer hard disk is

installed.

Network

Menu item

Description

Network Setup Page

Print a page that shows the conﬁgured network and wireless settings on the
printer.

Note:

This menu item appears only in network printers or printers connected

to print servers.

‑

Fi Direct Connected Clients

Print a page that shows the list of devices that are connected to the printer using
Wi

‑

Fi Direct.

Note:

This menu item appears only when Enable Wi

‑

Fi Direct is set to On.

Help

Menu item

Description

Print All Guides

Prints all the guides

Connection Guide

Provides information about connecting the printer locally (USB) or to a network

Information Guide

Provides information about the printer

Media Guide

Provides information about loading paper and specialty media

Mono Quality Guide

Provides information about solving mono print quality settings

Moving Guide

Provides information about moving, locating, or shipping the printer

Print Quality Guide

Provides information about solving print quality issues

Supplies Guide

Provides information about ordering supplies

Troubleshooting

Menu item

Description

Print Quality Test Pages

Print sample pages to identify and correct print quality defects.

Printing the Menu Settings Page

From the control panel, navigate to:

Settings

Reports

Menu Settings Page

Understanding the printer menus

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands