Lexmark MX-B557P User Manual Download Page 126

Page: 126 / 217

Saving energy and paper

Conﬁguring power save mode settings

Sleep mode

From the control panel, navigate to:

Settings

Device

Power Management

Timeouts

Sleep Mode

For non

‑

touch

‑

screen printer models, press

to navigate through the settings.

Enter the amount of time that the printer stays idle before it enters Sleep mode.

Hibernate mode

From the control panel, navigate to:

Settings

Device

Power Management

Timeouts

Hibernate Timeout

For non

‑

touch

‑

screen printer models, press

to navigate through the settings.

Select the amount of time before the printer enters Hibernate mode.

Notes:

•

Make sure to wake the printer from Hibernate mode before sending a print job.

•

To wake the printer from Hibernate mode, press the power button.

•

The Embedded Web Server is disabled when the printer is in Hibernate mode.

Adjusting the brightness of the display

Note:

This setting is available only in some printer models.

From the control panel, navigate to:

Settings

Device

Preferences

For non-touch-screen printer models, press

to navigate through the settings.

In the Screen Brightness menu, adjust the setting.

Conserving supplies

•

Print on both sides of the paper.

Note:

Two-sided printing is the default setting in the print driver.

•

Print multiple pages on a single sheet of paper.

•

Use the preview feature to see how the document looks like before printing it.

•

Print one copy of the document to check its content and format for accuracy.

Maintaining the printer

126

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands