Lexmark MX-B557P User Manual Download Page 186 | Manualshive

Page: 186 / 217

background image

8

Close the access cover.

9

Connect the power cord to the electrical outlet, and then turn on the printer.

CAUTION—POTENTIAL INJURY:

To avoid the risk of ﬁre or electrical shock, connect the power cord

to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.

Installing the 250

‑

or 550

‑

sheet tray

CAUTION—SHOCK HAZARD:

To avoid the risk of electrical shock, if you are accessing the controller

board or installing optional hardware or memory devices sometime after setting up the printer, then turn
the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any
other devices attached to the printer, then turn them off as well, and unplug any cables going into the
printer.

CAUTION—TIPPING HAZARD:

Installing one or more options on your printer or MFP may require a

caster base, furniture, or other feature to prevent instability causing possible injury. For more information
on supported conﬁgurations, contact the place where you purchased the printer.

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet, and then from the printer.

Upgrading and migrating

186

«
...
184
185
186
187
188
...
»

Summary of Contents for MX-B557P


























































































































































































































Reviews:

No comments

Related manuals for MX-B557P

Brand: Oki Pages: 2

Brand: Panasonic Pages: 32

SPP 2020 - Photo Printer - 20 Sheets

Brand: Samsung Pages: 81

Brand: Samsung Pages: 98

Brand: Samsung Pages: 6

Brand: Samsung Pages: 203

Brand: Samsung Pages: 264

Brand: Samsung Pages: 228

Brand: Samsung Pages: 211

Brand: Samsung Pages: 5

Brand: Samsung Pages: 92

Brand: Samsung Pages: 75

Brand: Samsung Pages: 11

Brand: Samsung Pages: 206

ML 3050 - B/W Laser Printer

Brand: Samsung Pages: 103

ML 3050 - B/W Laser Printer

Brand: Samsung Pages: 215

Brand: Samsung Pages: 2

CLP 510N - Color Laser Printer

Brand: Samsung Pages: 266

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands