Lexmark MX-B557P User Manual Download Page 159

Page: 159 / 217

Vertical light bands

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Do vertical light bands appear on prints?

Contact your

dealer

. The problem is

solved.

Vertical white lines

Note:

Before solving the problem, print the Print Quality Test Pages. From the control panel, navigate to

Settings

Troubleshooting

Print Quality Test Pages

. For non

‑

touch

‑

screen printer models, press

navigate through the settings.

Action

Yes

Step 1

Check if the printer is using a genuine and supported toner
cartridge.

Note:

If the cartridge is not supported, then install a

supported one.

Print the document.

Do vertical white lines appear on prints?

Go to step 2.

The problem is
solved.

Troubleshooting

159

Summary of Contents for MX-B557P


























































































































































































































Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands

Lexmark MX-B557P, User Manual

Search results

Summary of Contents for MX-B557P

Reviews:

Related manuals for MX-B557P

Brands by name

Popular brands