Lexmark CS410 series User Manual Download Page 55

Page: 55 / 210

Printing from a ﬂash drive

Notes:

•

Before printing an encrypted PDF ﬁle, you will be prompted to enter the ﬁle password from the printer
control panel.

•

You cannot print ﬁles for which you do not have printing permissions.

Insert a ﬂash drive into the USB port.

Notes:

•

A ﬂash drive icon appears on the printer control panel and in the held jobs icon when a ﬂash drive is
installed.

•

If you insert the ﬂash drive when the printer requires attention, such as when a jam has occurred,
then the printer ignores the ﬂash drive.

•

If you insert the ﬂash drive while the printer is processing other print jobs, then

Busy

appears. After

these print jobs are processed, you may need to view the held jobs list to print documents from the
ﬂash drive.

Warning—Potential Damage:

Do not touch the printer or the ﬂash drive in the area shown while actively

printing, reading, or writing from the memory device. Loss of data can occur.

Printing

Summary of Contents for CS410 series



















































































































































































































Search results

Summary of Contents for CS410 series

Reviews:

Related manuals for CS410 series

Brands by name

Popular brands

Lexmark CS410 series, User Manual

Search results

Summary of Contents for CS410 series

Reviews:

Related manuals for CS410 series

Brands by name

Popular brands