Lexmark CS410 series User Manual Download Page 192

Page: 192 / 210

Action

Yes

Step 4

Check if the cable connections to the printer and print server are
secure.

Connect the cables properly. For more information, see the
setup documentation that came with the printer.

Open a Web browser, and then type the printer IP address.

Press

Enter

Does the Embedded Web Server open?

The problem is
solved.

Go to step 5.

Step 5

Temporarily disable the Web proxy servers.

Proxy servers may block or restrict you from accessing certain
Web sites including the Embedded Web Server.

Does the Embedded Web Server open?

The problem is
solved.

Contact your system
support person.

Contacting customer support

Before contacting customer support, make sure to have the following information:

•

Printer problem

•

Error message

•

Printer model type and serial number

Go to

http://support.lexmark.com

to receive e

‑

mail or chat support, or browse through the library of manuals,

support documentation, drivers, and other downloads.

Technical support via telephone is also available. In the U.S. or Canada, call 1-800-539-6275. For other countries
or regions, go to

http://support.lexmark.com

Troubleshooting

192

Summary of Contents for CS410 series



















































































































































































































Search results

Summary of Contents for CS410 series

Reviews:

Related manuals for CS410 series

Brands by name

Popular brands

Lexmark CS410 series, User Manual

Search results

Summary of Contents for CS410 series

Reviews:

Related manuals for CS410 series

Brands by name

Popular brands