Action
Yes
No
Step 1
a
Print a font sample list to check if the fonts you are using are
supported by the printer.
1
From the printer control panel, navigate to any of the
following:
•
>
Reports
>
Print Fonts
•
Settings
>
Reports
>
Print Fonts
2
Select
PCL Fonts
or
PostScript Fonts
.
b
Resend the print job.
Are you using fonts that are supported by the printer?
Go to step 2.
Select a font that is
supported by the
printer.
Step 2
Check if the fonts installed on the computer are supported by the
printer.
Are the fonts installed on the computer supported by the printer?
The problem is
solved.
Contact
Clipped pages or images
Leading edge
Trailing edge
ABCDE
ABCDE
ABCDE
Action
Yes
No
Step 1
a
Move the width and length guides in the tray to the correct
positions for the paper loaded.
b
Resend the print job.
Is the page or image clipped?
Go to step 2.
The problem is
solved.
Troubleshooting
170
Summary of Contents for CS410 series
